Resíduo do processo de reciclagem de papel como material alternativo para aplicações em geotecnia ambiental

Autores

  • Fernando Marinho Escola Politécnica Universidade de São Paulo
  • Alexandre Cabral Universidade de Sherbrooke
  • Cláudia Teixeira Universidade de Caxias do Sul
  • Paula Teixeira Escola Politécnica Universidade de São Paulo

DOI:

https://doi.org/10.14195/2184-8394_115_6

Palavras-chave:

Barreira capilar, resíduos de papel, dados experimentais

Resumo

Para fabricar papel a partir de aparas é preciso separar as fibras secundárias de celulose dos agregados e contaminantes do papel. Devido às limitações do processo, até 30 % das fibras são perdidas na forma de resíduo, sobretudo na etapa de remoção da tinta. O resíduo de papel, que por suas características é também chamado de material argilo-fibroso, é composto principalmente por fibras de celulose, argila e calcita. Este resíduo vem sendo estudado como material geotécnico alternativo e vários projetos foram executados, in - cluin do projetos de larga escala no campo. Este trabalho apresenta os resultados de estudos realizados em dois resí duos da indústria de papel brasileira e canadense. Os estudos aqui apresentados mostram o grande po ten - cial de utilização de subprodutos da reciclagem de papel como material de recobrimento, seja em aterros sani - tá rios ou em sítios de mineração. 

Downloads

Não há dados estatísticos.

Referências

Ait-Benichou, S., Cabral, A.R., Teixeira, C. E. (2008). Evolution of biodegradation of deinking by products used as alternative cover material. Waste Management 28(1): 85-96.

Andersland, O. B. e Mathew, J. (1973). Consolidation of high ash papermill sludges – Journal of the Soil Mechanics and Foundation Division, vol. 99 n.SM5, pp. 365-374.

Audet, C., Lefebvre, G., Cabral, A. R., and Burnotte, F. (2002). State of development in the valorization of deinking by-products as an alternative to fine grained soils. TAPPI, Montréal.

Brown, R. A., Fourie, A. B., and Snyman, R. (1998). Pulp sludge: waste or valuable capping mate - rial Proc. Wastecon '98, Fourteenth Congress of the Insitutte of Waste Management, Kempton Park, 564-579.

Burnotte, F., Cabral, A. R. and Lefebvre, G. (2004). "A Simple Field Method to Monitor the State of Satu ra tion in Capillary Barriers." Geotechnical Testing Journal 27(6): 614-618.

Cabral, A. R., Burnotte, F. e Lefebvre, G. (1999). Design construction and monitoring of waster rock cover using pulp and paper residues. Symposium on Tailings and Mine Wastes, Fort Collins, Colo ra do., Jan., pp. 405-415 Proceedings.

Cabral, A. R., Burnotte, F., Lefebvre, G. e Panarotto, C.T. (2002). Geotechnical characterization of a pulp and paper (deinking) residue used in cover systems. Environmental Geotechincs (4ª ICEG), v. 1, pp. 207-212.

Cabral, A. R., Tremblay, P. and Lefebvre, G. (2004). "Determination of the diffusion coefficient of oxygen for a cover system composed of pulp and paper residues." Geot. Testing J. 27(2): 184-197.

Cabral, A.R., Lefebvre, G. Burnotte, F. Panarotto, C.T. e Pastore, E.L. (1999). Use of pulp and paper resi dues as an alternative cover material to landifill and to acid generating tailings. Segundo Se mi nário de Meio Ambiente em Industria de Processo. São Paulo, Jun pp. 56-70.

Cabral, A.R., Racine, I., Burnotte, F., and Lefebvre, G. (2000). Diffusion of Oxygen through a Pulp and Paper Residue Barrier. Canadian Geotechnical Journal, 37, pp. 201-217.

Chabot, R., Marchildonil, l., Labinte, M. and Lavallée, H.-C. (1991). "Que faire des boues de désencrage?" Journal des Pâtes et Papiers, Nov. et Déc.

Ettala, M. (1993). Quality of deinking sludge. J. Environ. Sci. Health, A28(4), 923-932.

Floess, C. H., Smith, R. F. J. and Hitchock, R. H. (1995). "Capping with fiber clay." Journal of Civil Engineering: 62-63.

Kamon, M., Inazumi, S., Rajasekaran, G. and Katsumi, T. (2002). "Evaluation of waste sludge compatibility for landfill cover application." Soils & Foundations 42(4): 13-27.

Kamon, M., Katsumi, T., Rajaseakran, G. e Inazumi, S. (2000). Waste sludges utilization as landfill cover. Geo-Eng 2000, Melbourne, Australia, CD-ROM.

Kraus, J. F., Benson, C. H., Van Maltby, C., and Wang, X. (1997). Laboratory and field hydraulic conduc ti vity of three compacted paper mill sludges. Journal of Geotechnical and Geoenvironmental Engineering, 123(7), 654-662.

Lambe, T.W., e Whitman, R.V. (1979). Soil mechanics, SI version. John Wiley and Sons, New York.

LaPlante, K. (1993). Geotechnical investigation of several paper mill sludges for use in landfill covers, Master thesis, Rensselaer Polytechnic Institute, Troy, New York, United States.

Latva-Somppi, J., Tran, H. N., Barham, D., and Douglas, M. A. (1994). Characterization of deinking sludge and its ashed residue. Pulp & Paper Canada, 95( 10), T382 - T385.

Malmstead, M. J., Bonistall, D. F. and Van Maltby, C. (1999). "Closure of a nine-acre industrial landfill using pulp and paper mill residuals." TAPPI Journal 82(2): 153-160.

Maltby, C. V., and Eppstein, L. (1994). A field case study of the use of paper industry sludges as hydraulic barriers in landfill cover systems. Proceedings of Hydraulic Conductivity and Waste Conta mi nant Transport in Soil, Philadelphia, 546-58.

Moo-Young, H.K. e Zimmie, T. F. (1996b). Effects of organic decomposition mill sludges as landfill cover material”, Environmental Geotechnics. Masashi Kamon (editor), Balkema. pp. 827-832.

Moo-Young, H.K. e Zimmie, T. F. (1996a). Geotechnical properties of paper mill sludges for use in landfill cover” Journal of Geotechnical Engineering, pp.768-775, Sept..

Panarotto, C. T., Cabral, A. R., Lefebvre, G. (2005). Environmental, geotechnical and hidraulic beha vior of a cellulose-rich by-product used as alternative cover material. Journal of Envi - ronmental Engi nee ring and Science. 4(2): 123-138.

Pinto, C.S. (1965). Equipamento reduzido para moldagem de corpo de prova de solo- aditivo, I Simpósio sobre Pesquisas Rodoviárias, Rio de Janeiro. Ago..

Quiroz, J. D.; Simpson, P.T. and Zimmie, T. F. (2000). “Evaluation of paper sludge landfill cover sttlement” – Geo-Denver – Environmental Geotechnics – GTP 105, pp. 16-31.

Quiroz, J. D. e Zimmie T. F. (1998). Paper mill sludger landfill cover construction. Recycled materils in geotechnical applications, Geotechnical Special publication Number v.79, pp.19-36.

Teixeira, C.E. (2001). Evolution biochimique des résidus de désencrage dans un contexte de valo - ri sation comme barrière de recouvrement. Tese de doutorado (Ph.D), Université de Sherbrooke, Canada.

Teixeira, P,F. (2002). Dissertação de Mestrado - Características Geotécnicas de um resíduo de papel, Escola Politecnica , Universidade de S.P..

Vlyssides, A. G., and Economides, D. G. (1997). Characterization of wastes from a newspaper wash deinking process. Frenesius Environmental Bulletin, 6, 734-739.

Wang, M. C.; He, J. Q. and Joa, M. (1991). “Stabilization of water plant sludge for possible utilization as embankment material” – The Pennsylvania State University, State College, PA.

Wang, M. C. e Tseng, W. Permeability behavior of water treatment sludge. Journal of Geotechnical Engineering. 1993. v. 119, p.1672-1677.

Zimmie, F. T. e Moo-Young, H. K. (2000). Hydraulic conductivity of paper sludger used for landfill covers. Specialty Conference on Geoenvironment 2000, Special publication.

##submission.downloads##

Publicado

2009-03-21

Edição

Secção

Artigos